ALFA ROMEO 159 OFF SIDE (RIGHT) TRACK ROD END 77363706

159 2005-2011
1.8 MPI 140BHP & 200BHP
1.9 JTDM 8V & 16V 120BHP, 136BHP & 150BHP
1.9 JTS 160BHP
2.0 JTDM 136BHP & 170BHP
2.2 JTS 185BHP
2.4 JTDM 200BHP & 210BHP
3.2 JTS 260BHP

OE 77363707

ALFA ROMEO GT RIGHT (OFF SIDE) TOP WISHBONE [SKF]

GT 2003-2010
1.8 TWIN SPARK 140BHP
1.9 JTD 150BHP & 170BHP
2.0 JTS 162BHP & 165BHP
3.2 V6 24V 240BHP

1 X 82427709 WISHBONE BOLT RECOMMENDED
1 X WUR0368010125 NYLOC NUT RECOMMENDED

OE 51834094 51776326 60651940 60657246 60666789

3.2 JTS 03.2008-03.2011
3.2 JTS Q4 03.2006-03.2011

Same as OE 50707150 50515227

We Advise Fitting in pairs

ALFA ROMEO SUD SPRINT & 33 POWERFLEX PFF1-104-18 BUSHES ANTI ROLL BAR TO ARM BUSH 18MM [SET OF 2]

1971-1989 models

Diagram Ref: 4

For later models 1981 on, use the 18mm end bush PFF1-104-18. Early models, upto 1981, use the end 14mm diameter bush PFF1-104-14.

OEM Part Number: 60505020

4X4 NO. 7 IN DIAGRAM

Same as OE 71773667

ALFA ROMEO GIULIETTA LEFT (NEAR SIDE) REAR DROPLINK [SKF]

GIULIETTA 2010-2019
1.4 105BHP, 120BHP, 150BHP & 170BHP
1.6 JTDM 105BHP, 116BHP & 120BHP
1750 TBi 230BHP, 235BHP & 241BHP
2.0 JTDM 136BHP, 140BHP, 150BHP, 170BHP & 175BHP

OE 51978679 51806609

ALL GT MODELS except GTA

1.8 T/S 2003-2010
2.0 JTS 2003-2010

Same as OE 51772430/46804012/46788800

We Advise Fitting in Pairs

Fitting Position Front Axle
Spring Design Coil spring with constant wire diameter
Length 387 mm
Weight 2.35 kg
Wire Diameter 11.75 mm
Outer Diameter 91 mm
Outer Diameter 1 118 mm

ALFA ROMEO 147 POWERFLEX PFF1-812 FRONT LOWER WISHBONE REAR BUSH [SET OF 2]

00-10 MODELS

DIAGRAM REF: 2

We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM